The Mobile hammer crusher is a rotor disk with a hammer head driven by the motor to drive the hammer head to make a high-speed circular motion. The Mobile hammer crusher is a rotor disk with a hammer head driven by the motor to drive the hammer head to make a high-speed circular motion. When the material enters the crushing chamber, it is hit by the high-speed rotating hammer, and the material is fired at high speed against the counterattack. The high-speed flying materials are broken by friction and collide, and the materials meeting the particle size requirements are discharged from the specified sieve holes. After one crushing, the material whose particle size does not meet the requirements is broken and crushed again by the hammer. When the extra large material enters the crushing chamber, the pre-positioned strip is blocked in the upper part of the crushing chamber, and is broken into small and medium-sized materials and then falls into the lower crushing chamber to prevent damage to other working parts due to the bulk load entering the load. Broken is safer and smoother.

    First, the equipment advantages:
1. The structure is simple, the size is compact, the self weight is small, and the power consumption per unit product is small.
2, high productivity, large crushing ratio, small and uniform particle size, cube, excessive fragmentation.
3. The work is continuous and reliable, the maintenance and repair is convenient, and the vulnerable parts are easy to be repaired and replaced.
Second, the equipment shortcomings:
1. The main parts of the work, the hammer head, the purlin, the lining, the rotor, the disc, etc. wear faster, especially when the working object is very hard, the wear is faster.
2. When the broken cavity falls into a metal block that is not easily broken, it is prone to accidents and easily damage the body parts.
3. The material with water content >12%, or more clay, the discharge raft is easy to block, the productivity is decreased, and the energy loss is increased, so that the wear speed of the vulnerable parts is accelerated.
    Third, during the operation process, if there is good daily maintenance and maintenance, it can extend the service life of the equipment and have a good working condition, can withstand greater working pressure, and the work can last longer. The output and quality of the materials that can be broken are even larger, and can better meet the production needs. The following is a detailed description of the machine maintenance and maintenance notes:
    1. Always pay attention to the fixing and tightening of each fastener.
    2. Check the condition of the screen regularly and remove it immediately if there is any blockage.
    3. Pay attention to the degree of wear of the wearable parts and replace the worn parts at any time.
    4, the feed should be even to prevent excessive negative phenomenon.
    5. It is strictly forbidden to carry out any adjustment, cleaning and overhaul work when the machine is running, so as to avoid danger.
    6. It is strictly forbidden to put materials that cannot be broken into the machine.
    7. If the machine fails during work, it should be stopped and repaired before proceeding.
    8. When parking, all the materials in the machine must be spit out. The power must be cut off during maintenance.